Jib Hank
Just broke first one. Little plastic buckle. Anyone ever replace ? Where can you purchase ?

Just broke first one. Little plastic buckle. Anyone ever replace ? Where can you purchase ?
Hello again! I went out and bought a pair of the 16.5" Wheeleez dolly wheels and found the width of their hubs are 1.5" too wide for the SS extenders I have on the dolly. My boat came with the large Florida Sailcraft jet ski wheels with 1" diameter centers and the extenders appear to be the 9" variation. In an attempt to free the extenders, I found the are "welded" to the alum axle. After generous applications of PB, no movement. What can I do? I don't have much in the way of shop tools here.
Thanks in advance!
UPDATE! I was able to free the extenders with a large dose of Kroil, heat (thanks Terry!) and a large pipe wrench!! However, the extenders are too small in length to adequately support the Wheeleez assemblies leaving only 2" of extender in the axle tube. I'm going to purchase a solid aluminum 1" tube for inserting in the axle tube. Terry has already performed this procedure with his Wheeleez assemblies and it works! 😁
I'm thinking of adding a larger deck hatch to accommodate a small cooler for food and goodies in the main hull, I'm thinking along these lines.
For those that have one, what brand did you chose and how difficult was the installation? Thanks in advance!!!

I'm picking up a Lt grey boat and want to do some touch up work to the amas and main hull. Does anyone know the company name they use for the Lt grey?
Thanks!!
For my boat (#371) "grey" = RAL color 'signal white' 9003. I ordered from: http://www.fibreglast.com/product/ral-gel-coat-color-book-4008/colorgelcoat
Vice President
US Ambassador
Full Member 2026
Texas
Full Member 2026
Since the lower clip, closet to the tack, is not used, you could use that one!